Steelo Fabrica is one of the best dealers of Naval Brass UNS C46400 Forged Bar. We give high-quality and high-performance forged bars to the customer. Our forged bars are budget-friendly so that the customer can afford them. We can design rods with different characteristics to meet customer requirements. We are committed to increase the quality of our product and improve our services.
Table of Content
What is the chemical composition of Naval Brass UNS C46400 alloy?
Naval Brass UNS C46400 alloy is a combination of Zinc, copper, and tin. This alloy has high strength and rigidity. Replacing tin with an equal amount of zinc results in high resistance to seawater corrosion. The addition of tin also gives the alloy an inherent resistance to dezincification, further inhibiting the impact of seawater at above normal temperatures. The alloy is also known for its resistance to abrasion, fatigue, and stress corrosion cracking.
What are the properties of the Naval Brass UNS C46400 Forged Bar?
These forged bars have ductility and malleability. Malleability property depends on the amount of zinc used. These rods have high corrosion resistance, and it has high demand in marine applications. It is highly known for resisting corrosion in seawater even at higher than normal temperatures. This rod is good for hot working.
These forged bars show properties like high resistance to corrosion, hot workability, and hot forge-ability. Fabrication processes for this product are blanking, drawing, bending, heading and upsetting, hot forging, and pressing. Our company supplies these rods has resistance to pressure and high temperature.
Physical properties of Naval Brass UNS C46400 forged Bars:
• Electrical Conductivity
• Modulus of rigidity
• Specific heat capacity
• Thermal conductivity
• Thermal expansion of coefficient
Applications of Naval Brass UNS C46400 forged bars:
These bars and rods are used where corrosion resistant is required. Our forged bars are used in marine applications and hardware applications.
Specification : ASTM B21/ ASME SB21
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Hollow Bars : Min Bore Size 20 mm and Max OD 100 mm
Round Bars : 6mm To 130 mm
Hex Bars : 5mm To 60mm
Square Bars : 4mm To 60mm
Billets : Up to 200 mm
Ingots: AS per Specification
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|Min/Max||59.0 – 62.0||.0.1||0.2||0.5 – 1.0||Rem|
We offer a broad range of ASTM B21 Naval Brass C46400 Forged Bars / Rods through a worldwide network of stock-keeping branches. These C46400 Naval Brass Bars and Rods is use in various industries like :