Steelo Fabrica is known for best services and high-end products like Brass IS 319 Grade 1 Forged Bar. These bars are available at market-leading rates in varying forms, sizes, and thicknesses per the client’s specifications. We have been into Imports, Stock holding and Supplies of these high-quality Rod products.
Table of Content
Introduction to Brass IS 319 Grade 1 Rod
IS 319 Free Cutting Grade 1 is the standard grade for Free Machining Brass. It is widely used owing to its suitability for high-speed machining operations and the manufacture of complex parts. The ease of brazing/soldering, high corrosion resistance combined with its superior strength and a machinability rating of 100% makes it an ideal choice of application in a wide range of brass components throughout the industry.
Chemical composition Brass IS 319 Grade 1 Forged Bars:-
Brass IS 319 Grade 1 Forged bars are composed using elements like copper, lead, iron and zinc and the amount of each compound is given below,
Copper in 56 to 58 %
Lead-in 2 to 3.50 %
Iron in 0.3% Max
Zinc in Balance
Other Impurities excel Fe. In 0.75% Max
What are the main Characteristics of Brass IS 319 Grade 1 Rod?
This standard, IS 319, covers free cutting brass bars, rods and sections having a minimum cross-sectional dimension over 6 mm suitable for high-speed screw cutting and turning work, and it provided a machinability rating of 100%.
We manufacture this high-grade Brass IS 319 Grade 1 Rod that provides excellent capacity for hot forming and good corrosion resistance. These Rods also shows outstanding suitability for Brazing and Soldering.
What are the Application Brass IS 319 Grade 1 Rods:-
These Rod products are highly demanded in several industries due to their exceptional performance.
These Rods are used in the manufacturing of High speed machined components, Aerospace components, architectural products.
Specification : ASTM B21/ ASME SB21
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|Chemical Requirements||Grade I|
|Cu||56 to 58 %|
|Pb||2 to 3.50 %|
|Other Impurities excel Fe.||0.75% Max|
|Yield Stress||150 MPa Min.|
|Tensile Strength||380 MPa Min.|
|Hardness Brinell||90 to 160 HB|
We offer a broad range of Brass IS 319 Grade 1 Forged Bars / Rods through a worldwide network of stock-keeping branches. These IS 319 Grade 1 Brass Alloys Forged Bars and Rods is use in various industries like :