We ‘STEELO-FABRICA’ are engaged into imports / exports / stockholding / trading of engineering and high performance plastics from India. We provide Polytetre fluoroethylene in forms of solid round rods or bars, square rods or blocks, sheets and plates for industrial and manufacturing purposes.
Polytetrafluoroethylene (PTFE) is a totally fluorinated polymer which is white, semi-opaque, and semi-crystalline. It has excellent chemical resistance, is unaffected by nearly all chemicals, and has a very high oxygen index (i.e. is inherently non-flammable). It is stable to high temperatures and has a very low coefficient of friction.
It is soft, easily deformed, low in strength, and has very low creep resistance with poor radiation resistance.
Table of Content
PTFE is relatively expensive and cannot be melt-processed (albeit theoretically, it melts at 327 °C, the melt viscosity of normal grades is almost infinite) and so is formed by powder sintering methods. PTFE (polytetrefluoroethylene) is a soft, low friction fluoropolymer with outstanding chemical resistance and weathering resistance.
PTFE is stable at temperatures up to 500oF and it is often used in high temperature environments. PTFE also has excellent electrical insulating properties. These products are available in different diameters, lengths, sizes, thickness, widths, grades, and other technical specifications. Highly efficient; these products are manufactured using a high-quality raw material, which is procured from the trusted vendors. We also customize these products as per the specification of our customers to the varied needs.
TYPICAL PROPERTIES DETAIL:
Tensile Strength (MPa)
Flexural Modulus (GPa)
Notched Izod (kJ/m)
Linear Expansion (/°C x 10-5)
Elongation at Break (%)
Strain at Yield (%)
Max. Operating Temp. (°C)
Water Absorption (%)
Oxygen Index (%)
Volume Resistivity (log ohm.cm)
Dielectric Strength (MV/m)
Dissipation Factor 1 kHz
Dielectric Constant 1 kHz
HDT @ 0.45 MPa (°C)
HDT @ 1.80 MPa (°C)
Material. Drying hrs @ (°C)
Melting Temp. Range (°C)
Mould Shrinkage (%)
Mould Temp. Range (°C)
Properties may vary on production of materials and subject to client specific requirements of specifications.
Indistrial Sheet :
Dimensions: 412 in x 12 in – 72 in x 120 in
Thickness: 3mm – 100mm
Rod : Outside Diameter: 0.125 in – 8 in
Granules : Material Category: PP Natural, PP Ultra Color, PP Super Color, PP Semi Super Color, Semi etc.
Sheet: Clear, Natural, Black, Clear A00, Bronze K09, Gray I30, Dark Gray I35, Black L10, Opaque White, Bright Yellow (Light Shade), Ruby Red (Medium Shade), Golden Amber (Medium Shade), Emerald Green (Dark Shade), Light Gray, Bright Amber, Yellow
Rod: Natural, White, Black etc.
Glass Fiber-filled PTFE, Graphite filled PTFE, Carbon filled PTFE, Molybdenum Disulfide-filled PTFE, Bronze-filled PTFE etc.
We offer a broad range of Polytetre Fluoroethylene Plastic through a worldwide network of stock-keeping branches. These PTFE is use in various industries like :