Steelo Fabrica manufactures naval Brass UNS C46200 Round Bars. We have a specified range of round bars with properties and features. Our bars have tremendous demand in the industrial areas as they perform reliably and flexibly with all sorts of applications.
Table of Content
UNS C46200 is a grade of the brass alloy of copper comprising chiefly of zinc and tin. This grade is also called as naval brass. This grade and brass alloy have excellent hot forge ability, good strength, good corrosion resistance, electrical conductivity, and a greater dezincification resistance than other alloys or grades.
The microstructure of the tin Naval Brass UNS C46200 Round Bars is based on the alloy’s zinc and tin content. The chemical, physical and mechanical properties of these Naval Brass UNS C46200 Round Bars are excellent as they work reliably and flexibly with different applications.
Chemical contents of Naval Brass UNS C46s200 Round Bars:
Applications where Naval Brass UNS C46200 Round Bars are used:
Common applications for Naval Brass UNS C46200 Round Bars include forged, stamped, rolled, and cold-headed products for electrical, mechanical or corrosion-resistant applications, and architectural products and marine hardware.
Naval Brass UNS C46200 Round Bars have excellent hot working characteristics that enable the alloy to be close die formed into valve assemblies and other complex-shaped elements. In addition, they can be cold worked to increase strength.
Hence, these bars have tremendous demand in different working sectors. In addition, they have excellent demands over the global platform. These Naval Brass UNS C46200 Round Bars include the properties and features that make them ideal for working in different sectors.
Specification : ASTM B21/ ASME SB21
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Hollow Bars : Min Bore Size 20 mm and Max OD 100 mm
Round Bars : 6mm To 130 mm
Hex Bars : 5mm To 60mm
Square Bars : 4mm To 60mm
Billets : Up to 200 mm
Ingots: AS per Specification
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|Naval Brass Grade||BS||JIS||UNS|
|C46200||CZ 112||C 4621||C46200|
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|Elastic (Young’s, Tensile) Modulus||Elongation at Break||Poisson’s Ratio||Shear Modulus||Shear Strength||Tensile Strength: Ultimate (UTS)||Tensile Strength: Yield (Proof)|
|100 GPa – 15 x 106 psi||17 to 34 %||0.31||40 GPa||240 to 290 MPa||370 to 480 MPa||120 to 290 MPa|