Steelo Fabrica is a Leading Company that manufactures and sells the Best quality of Pure Tungsten Rod and Pure Tungsten 99% Round Bar.
What is the Tungsten Alloy?
Tungsten is a very stiff and brittle material. Tungsten is the metal with the greater melting point of all metals (3420 °C) at a very high specific weight and is featured above all by its dimensional stability at high temperatures.
Pure Tungsten Rod: Pure tungsten rods are manufactured from a pure alloy of Tungsten. All materials are controlled a lot, stress relieved and manufactured through high-temperature pressing and sintering procedures. This rod is ideal for machine shops, labs, research and development, and DIY machinists.
Table of Content
Pure Tungsten Rod has a low vapor pressure at elevated temperatures and a low coefficient of thermal expansion. As a result, it is valuable for use in various high-temperature products and processes such as glass-to-metal seal parts and support parts for lighting and electronics.
Pure Tungsten 99% Round Bar: We fabricate the pure and potassium developed Pure Tungsten 99% Round Bar. The round bars are targeted for use where high temperature, non-sag properties are required in smaller cross sections by the lighting and electronic industries.
The main feature and physical properties of Pure Tungsten 99% Round Bar are:
The most important properties of Tungsten Rod are a low vapor pressure and the highest hardness and strength of all metals. In addition to the very high-density, Tungsten Rod has very good electrical and thermal conductivities
・High melting point: It is the Highest among all metals.
・Heavy: It is Very high in density.
・Heat resistant. It has excellent high-temperature strength.
・Least corrosion. These round bars are Acid and chemical-proof.
Application: Tungsten rods are mainly used in incandescent filaments or electron tubes. In addition, Tungsten 99% round Bars are used in filaments, boats and vapor deposition technology.
Specification : ASTM B777 ASME SB777
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
Tungsten Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
|5.0 mm||45.0 mm|
|6.0 mm||50.0 mm|
|7.0 mm||55.0 mm|
|8.0 mm||60.0 mm|
|9.0 mm||65.0 mm|
|10.0 mm||70.0 mm|
|12.0 mm||75.0 mm|
|16.0 mm||80.0 mm|
|20.0 mm||90.0 mm|
|25.0 mm||100.0 mm|
|30.0 mm||130.0 mm|
|35.0 mm||160.0 mm|
|40.0 mm||200.0 mm|
We offer a broad range of Pure Tungsten Round Bars through a worldwide network of stock-keeping branches. These Pure Tungsten Rods is use in various industries like :