Steelo Fabrica is the premium manufacturer and supplier of the best quality CU70Ni30Fe1 Copper Nickel Round Bar.
What is CU70Ni30Fe1 Copper Nickel?
CU70Ni30Fe1 Copper Nickel is a copper alloy containing nickel and other strengthening elements such as iron and manganese. The combination of copper and nickel alloy in the right amount makes it a superior quality product. Due to its excellent quality, it has become a much-demanded product.
Table of Content
CU70Ni30Fe1 Copper Nickel Round Bar:
CU70Ni30Fe1 Copper Nickel Round Bar is a metal product bearing rectangle section. It is used in a broad range of structural and architectural applications. It has high corrosion resistance even with resistance to corrosion fatigue. In addition, CU70Ni30Fe1 Copper Nickel Round Bar resists corrosive and erosive actions of rapidly moving seawater.
CU70Ni30Fe1 Copper Nickel Round Bar is a long, cylindrical copper-nickel bar with too much industrial and commercial usage, and the most common application includes shafts. CU70Ni30Fe1 Copper Nickel Round Bar is very hard also but tough and pliable. CU70Ni30Fe1 Copper Nickel Round Bar with 10 and 30% nickel is commonly used for condenser, distiller, evaporator, and heat exchanger tubes. The general heat treatment applied to it is annealing after cold working. It is highly resistant to corrosion by salt water, and hence it is useful in seawater systems.
Properties of CU70Ni30Fe1 Copper Nickel Round Bar:
Some of the important properties of CU70Ni30Fe1 Copper Nickel Round Bar are as follows:
• Inherent resistance to macro fouling
• good tensile strength
• corrosion resistance
• excellent flexibility when annealed
• Excellent thermal ductility
• useful antimicrobial touch surface properties.
Since CU70Ni30Fe1 Copper Nickel Round Bar has strong antimicrobial properties, they are promoted as hygienic “touch materials,” particularly in hospital intensive care units, to reduce infections and cross-contamination.
Application of CU70Ni30Fe1 Copper Nickel Round Bar :
CU70Ni30Fe1 Copper Nickel Round Bar is also known as cupronickel round bar. It is widely used for marine applications due to its good fabricability, excellent resistance to seawater corrosion and low macro fouling rates.
• commercial and naval shipping
• offshore oil and gas production
• power generation and desalination.
Specification : ASTM B151 / ASME SB151
Standard : EN, DIN, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|Cupro Nickel Cu70Ni30Fe1||2.0882||C71500|
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|Inconel 601 Round bar Type||SIZES (mm)||SIZES (Inches)||ISO Tolerance|
|Alloy 601 Cold Drawn and Polish Round Bar||3.00 – 75.00||1/8″ – 3.00″||h8-h9-h10-h11|
|Nickel Alloy 601 Cold Drawn and Ground Bar||10.00 – 75.00||5/6″ – 2.50″||h8-h9-h10-h11|
|UNS N06601 Peeled and Polished Round Bar||40.00 – 150.00||1.50″ – 6.00″||h11, h11-DIN 1013|
|Inconel 601 Peeled and Ground Bar||20.00 – 50.00||3/4″ – 2.00″||h9-h10-h11|
|Inconel 601 Round bar|
|Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr|
|Copper Nickel Cu70Ni30Fe1||65.0 min||.05 max||0.4-1.0||1 max||29-33||1 max|
|0.323 lb/in3 at 68 F||2260 F||50000 psi||20000 psi||30%|