Steelo Fabrica is the leading manufacturer and exporter of the UNS S66286 round bars manufactured using premium quality raw materials.
Chemical composition of the UNS S66286:
UNS S66286 alloy belongs to the Incoloy family; thus, the chemical composition consisted of basic nickel, chromium as its main elements.
It has nickel and chromium as its base material, this alloy also contains molybdenum and titanium to a certain degree. UNS S66286 alloy offers a great mechanical property, thus widely applicable in engineering sectors.
Table of Content
Features that UNS S66286 alloy possesses:
This alloy exhibits high strength and oxidation resistance at a temperature range as high as 1300 degrees F. Using this UNS S66286 alloy; round bars has ability to stand in high levels of stress and heat. That is why it is highly applicable and makes them perfect to be employed across a wide array of industries.
This UNS S66286 alloy has an austenitic containing microstructure; the metal is extremely ductile and could effortlessly shaped into any form.
Even it has a higher level of ductility, the strength under high stress of these round bars could be enhance for age-hardened material. At the higher temperature regions, it exhibits high resistance to rust and corrosion when introduced to aqueous media.
In atmosphere where temperature settings are lower as of -320 degrees F, this alloy round bar demonstrates good performance.
Other than the features mentioned earlier, these round bars also offer other features such as good Dimensional accuracy, smoother surface finishes, good aesthetic appeal, good machinability, good formality, good working ability.
Where does UNS S66286 alloy round bars are widely applicable?
These UNS S66286 alloy bars are Ideal for applications where both good strengths and oxidation resistance at a temperature as high as 1300 degrees F are necessary.
Some of the uses are listed as below:
• Heavy Engineering Industries
• Railway engines and coaches
• Agricultural sector
• manufacturing conveyor shafts
• Electric pumps
Specification : ASTM A638 / ASME SA638
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|UNS S66286 Round bar Type||SIZES (mm)||SIZES (Inches)||ISO Tolerance|
|UNS S66286 Cold Drawn and Polish Round Bar||3.00 – 75.00||1/8″ – 3.00″||h8-h9-h10-h11|
|UNS S66286 Cold Drawn and Ground Bar||10.00 – 75.00||5/6″ – 2.50″||h8-h9-h10-h11|
|UNS S66286 Peeled and Polished Round Bar||40.00 – 150.00||1.50″ – 6.00″||h11, h11-DIN 1013|
|UNS S66286 Peeled and Ground Bar||20.00 – 50.00||3/4″ – 2.00″||h9-h10-h11|
|UNS S66286 Round bar|
|Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr|
|Alloy A286||13.5-16.0||24.0-27.0||1.0-1.5||1.0 max||0.1-0.5||0.35 max||1.9-2.35||0.003-0.01||0.08 max||Bal||2.0||1.0||0.025||0.025|
|Ultimate Tensile Strength, ksi||95*||145||143||138||131||103||64|
|0.2% Yield Strength, ksi||50*||95||93||93||87||88||62|