Steelo Fabrica is a top manufacturing company and carries C26000 Brass flat bars. We provide a very large range of brass metal components in different sizes and finishes as per the client requirement.
Chemical Constituent:
Main chemical constituent of the yellow brass C26000 flat bars has Copper ( 68.5-71.5 %), Lead (max 0.07%), Iron (max 0.05%), and zinc.
C26000 is the most ductile material of all the brasses and is used in greater quantity than any other copper-zinc alloy.
Table of Content
Fabrication Properties of C26000 Flat Bars are listed as below:
This yellow brass materials have numerous advantageous properties due to which it is widely used in the manufacturing and engineering sector. Different fabrication techniques are compatible with this material, and it has excellent soldering and brazing property. At the welding time, it works relatively well with oxy-acetylene and resistance (spot /seam) welding, whereas it works fairly well with the gas shielded arc welding process.
These yellow brass C26000 flat bars having the capacity for being cold worked and fair good for being hot worked. It works in temperatures 725 – 850-degree F for hot working, 375-650 degrees Celsius for the annealing process.
Other properties of this yellow brass C26000 flat bar have superior machinability and an electroplating finish.
This flat bar has good corrosion resistance to weathering and very good resistance to many chemicals agents. It may undergo dezincification in stagnant or slowly moving salt solutions or acidic solutions. Although it works well in water media, it is preferred as it contains a small arsenic addition.
C26000 alloy should not be used in contact with ammonia or its compounds, as it may suffer stress corrosion cracking.
Typical Applications areas of C26000 Includes:
• Architecture
• Grillwork appliances
• Drawn & spun containers and components
• Radiator cores and tanks
• Electrical terminals
• Plugs and lamp fittings
• Locks
• Door handles
• Nameplates
• Plumbers’ hardware
• Fasteners
• Cartridge cases
• Cylinder liners for pumps.
ASTM B-36
ASME SB-36
UNS C26000
BS
CZ106
Specification : ASTM B36/ ASME SB36
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Flat Bars : 6mm To 130 mm
Ingots: AS per Specification
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Flat, Patta Patti
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
HOW TO GET BEST PRICE OF Yellow Brass C26000 Flat BAR ?
If looking for Cartridge Brass C26000 Flat Bars and Rod in exact length so first check Yellow Brass C26000 Flat Bars price per KG in India and calculate with wight chart before negotiating with your supplier.
Cu | Fe | Pb | Zn | |
Min/Max | 68.5 – 71.5 | 0.05 | 0.07 | Rem |
Nominals | 70.0000 | – | – | 30.0000 |
Tensile Strength, min | Yield Strength, at 0.5% Extension Under Load, min | Elongation, 4x Diameter or 4x Thickness, min | Rockwell "B" Hardness | ||
---|---|---|---|---|---|
ksi | MPa | ksi | MPa | % | typical HRB |
50 | 345 | 30 | 205 | 20 | 55 |
Products
27 2nd Floor Rangwala Building, N D Road, 58, Islampura Street, Cawasji Patel Tank, Bhuleshwar, Mumbai, Maharashtra 400004