Steelo Fabrica is a well-known manufacturer and trader of naval brass CZ112 flat bars with superior quality and price ranges across various industries.
Table of Content
A composition that naval brass CZ112 flat bars hold:
Like most of the brass grades, this CZ112 alloy is mainly a mix of elements like copper and zinc. However, the addition of tin in this composition makes it different. There is usually around 1% of tin, 60% copper and 39% zinc present in the CZ112 alloy. There may even be a small amount of lead present in this composition, generally as little as 0.2% but perhaps up to 0.6%.
Characteristics of naval brass:
Brass alloy, in general, is good for this marine application due to its corrosion resistance property. However, naval brass CZ112 alloy, in particular, are better because of the tin present in the alloy, and it means naval brass can resist corrosion resistance and protect against dezincification.
Another big characteristic of this type of naval brass is its higher strength. The tin helps make the duplex structure harder and stronger, making it better than other brass grades. If even more strength is required, this alloy has superior hot formability.
Naval brass also provides great mechanical properties that make it even more useful in industries. It also responds well to soldering as well as brazing. Its machinability is really well that various fabrication processes done such as drawing and bending on it too
Use of naval brass CZ112 flat bars:
As its name suggests, naval brass is considered the best material for marine construction applications. It is also used in hardware such as propeller shafts, and it is also applicable for various fixtures and fittings. It is also utilised for decorative pieces due to its colour and aesthetic appeal.
It is also a good choice for things like heat exchanger components and machined parts. The high strength and corrosion resistance make it useful for subsea (marine) use too, and CZ112 material flat bars are useful for the above applications.
ASTM B-21
ASME SB-21
UNS C46400
JIS
CZ112
Specification : ASTM B21/ ASME SB21
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Hollow Bars : Min Bore Size 20 mm and Max OD 100 mm
Flat Bars : 6mm To 130 mm
Ingots: AS per Specification
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Flat, Patta Patti
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
HOW TO GET BEST PRICE OF Naval Brass CZ112 Flat BAR ?
If looking for Naval Brass Alloy CZ112 Flat Bars and Rod in exact length so first check Naval Brass C46400 Bars price per KG in India and calculate with wight chart before negotiating with your supplier.
Chemical Element | % Present |
---|---|
Copper (Cu) | 61.00 – 63.00 |
Tin (Sn) | 1.00 – 1.50 |
Lead (Pb) | 0.20 – 0.60 |
Iron (Fe) | 0.0 – 0.10 |
Nickel (Ni) | 0.0 – 0.20 |
Others (Total) | 0.0 – 0.20 |
Zinc (Zn) | Balance |
Mechanical Property | Value |
---|---|
Proof Stress | 160-200 MPa |
Tensile Strength | 340-400 MPa |
Hardness Brinell | 80 – 135 HB |
Elongation A | 25 – 20 % |
We offer a broad range of ASTM B21 Naval Brass CZ112 Flat Bars through a worldwide network of stock-keeping branches. These C46400 Naval Brass Alloy Bars is use in various industries like :
Products
27 2nd Floor Rangwala Building, N D Road, 58, Islampura Street, Cawasji Patel Tank, Bhuleshwar, Mumbai, Maharashtra 400004