Steelo Fabrica, one of the foremost brass flat bars manufacturers, has supplied superior quality brass casting flat bars to clients for many years, fulfilling orders for businesses working within the industrial sector.
Composition of brass casting flat bars:
As its brass bar, the base constituent is brass, copper, lead, tin and zinc. It is widely known as an alloy mixture of copper and zinc material. The proportional percentage of zinc and copper can be varied to create a range of brasses with varying properties, allowing hard and soft brasses.
These copper, brass, and bronze alloys are non-ferrous materials that hold many superior features useful for many industrial components.
Qualities that brass casting flat bars have:
These flat brass bars are made up of copper and zinc metal as it base constituent thus it exhibits excellent electrical and thermal conductivity. Other qualities are good corrosion and rust resistivity, higher strength, excellent ductility and malleability.
This widely used alloy of copper and zinc has higher malleability than bronze. It has a relatively low melting point of brass (900C to 940 degrees C, 1652F to 1724 degrees F as per composition). Apart from that, its flow characteristics make it a relatively easy metal to cast process.
Brass casting Flat bars are the most widely used and least expensive alloys, and they have relatively high strength. Some compositions exceptionally offer good ductility and excellent forming characteristics when shaped by pressing, deep drawing, rolling and machining.
These flat bars have Improved tensile properties are the result of casting. After casting, they can be softened and recrystallized by an appropriate treatment process. The addition of the lead (in which the elemental lead has existed as uniformly dispersed particles) to the brasses results in the free cutting of free-machining alloys. It has great dimensional accuracy and a perfect finish.
• Automobile Parts,
• Led Lighting Enclosure & Parts,
• Window Builder Hardware And Door Hardware.
• Marine Components
• Electrical Grade Casting,
• Architectural Hardware Components,
• Auto Components,
• Electrical Switchgears,
• Mechanical Engineering Components.
Material : Brass Casting
Available Sizes : 2 mm to 100 mm
Minimum Thickness : 1.60 – 50.80
Technique : Cold Rolled (CR) / Hot Rolled (HR)
Minimum Width : 6.35 – 76.20
Maximum Width : 127.0 – 127.0
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|