Steel Fabrica is one of the renowned exporters, manufacturers and suppliers of Monel Alloy K500 Round Bars globally. Our Monel K500 Round Bars are accessible to our valuable customers in a different range of diameters, wall thicknesses and sizes in customized form and at quite affordable rates. We are using the most excellent quality of raw material For manufacturing the Monel K500 Round Bars.
Table of Content
What is Monel K500 Round Bars?
Monel K500 Round Bars are a nickel-copper alloy, precipitation hardenable with the accumulation of titanium and aluminum. Monel K500 Round Bars retains the outstanding corrosion-resistant characteristics of Monel 400 and has better power and rigidness after precipitation hardening when compared with Alloy 400. Monel K500 Round Bars is generally well applicable for centrifugal pumps in the marine area due to its high force and low corrosion rates in high-velocity seawater. These Monel K500 Round Bars are also known as UNS N04405 Round Bars.
Features Of Monel K500 Round Bars:
The tensile strength and hardness property of these round bars have been enhanced after the precipitation-hardening process.
These bars have approximately three times higher yield strength.
These Bars can be strengthened further by employing cold working before the precipitation-hardening process.
The Bars have high tensile strength.
It has low corrosion rates in high-velocity seawater.
It is non-magnetic
These bars exhibit excellent mechanical properties from temperatures ranging from sub-zero settings right up to a temperature of 480C.
Typical usage for Monel K500 Round Bars includes many industrial applications. For instance, the Monel K500 Round Bars can be used to construct impellers, propeller shafts, pump shafts. The Monel K500 Round Bars could also be used to manufacture valve components for ships and offshore drilling towers, bolting and oil well drill collars and instrumentation components meant for production in the oil and gas industry.
Specification : ASTM B865/ ASME SB865
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|Monel K500 Round bar Type||SIZES (mm)||SIZES (Inches)||ISO Tolerance|
|Alloy K500 Cold Drawn and Polish Round Bar||3.00 – 75.00||1/8″ – 3.00″||h8-h9-h10-h11|
|Nickel Alloy K500 Cold Drawn and Ground Bar||10.00 – 75.00||5/6″ – 2.50″||h8-h9-h10-h11|
|UNS N05500 Peeled and Polished Round Bar||40.00 – 150.00||1.50″ – 6.00″||h11, h11-DIN 1013|
|Monel K500 Peeled and Ground Bar||20.00 – 50.00||3/4″ – 2.00″||h9-h10-h11|
|Monel K500 Round bar|
|Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr||Size||Kgs / Foot||Kgs / Mtr|
|Monel K500||63.0 min||0.5 – 2||0.25 max||1.5 max||0.5 max||27.0 – 33.0||2.3 – 3.15||0.010 max||0.35 – 0.85|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.44 g/cm3||1350 °C (2460 °F)||Psi – 160000 , MPa – 1100||Psi – 115000 , MPa – 790||20 %|
We offer a broad range of ASTM B865 Monel K500 Round Bars through a worldwide network of stock-keeping branches. These K500 Monel Round Bar is use in various industries like :