Steelo Fabrica is an Authentic Producer, Stockist and Seller of A-1Quality Of 99% Copper Forged Bar and 99% Copper Forged Rod. We are manufacturing these materials using the excellent quality of raw material. These are produced according to the desired specifications of our valuable customers.
Table of Content
What Is 99% Copper?
The pure copper or high copper alloys are fabricated from copper ores obtained as sulfides containing zinc, lead and other sulfur. These 99% Copper are Certified oxygen-free high-conductivity, and it contains a minimum of 99% of Copper without more mixing, making it the purest metal in common use. These are made with the highest quality Virgin materials and a tightly controlled production process. The customers can be sure of the reliable quality no matter the form that fits your application.
What is a 99% Copper Forged Rod?
99% Copper Rods are quality parts, evaluating constructively in material integrity, dimensional tolerance and surface finish with products made using other major metalworking processes. In precise, forming under heat and pressure closed dies produces dimensional accuracy-always repeatable, part to part and lot to lot.
What is a 99% Copper Forged Bar?
99 % Copper Forged Bars helps the design engineers and purchasing departments maximize the utility and cost advantages inherent in the specification of copper forgings. A glossary of those terms used in the industry and information required for ordering are included for better communication between user and supplier.
Copper forgings offer unique designer combinations of properties that other metals cannot match. Alloys can be selected to utilize the following Special Features:
• Excellent corrosion resistance
• Extreme Hardness
• Outstanding machinability
• Best joining and plating characteristics
• Superior polishing and finishing characteristics
• Non-sparking quality
Applications are as follows:
The form turned parts of all kinds;
Fasteners (screws, nuts);
Faucets and faucet handles;
Cable clips and luster clips;
Ballpoint pen tips;
Various parts for electrical engineering and general
Specification : ASTM B133, ASTM B124, ASTM B187, IS: 191, 613 & 1897
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
|BD||Bright drawn||SRE||Slit rolled edge|
|CG||Centreless ground||HF||Hot finished|
|CF||Cold finished||HRAP||Hot rolled annealed and pickled|
|P&T||Peeled and turned||RT||Rough turned/peeled|
|ST||Smooth turned||PR||Peeled and reeled|
|5.0 mm||45.0 mm|
|6.0 mm||50.0 mm|
|7.0 mm||55.0 mm|
|8.0 mm||60.0 mm|
|9.0 mm||65.0 mm|
|10.0 mm||70.0 mm|
|12.0 mm||75.0 mm|
|16.0 mm||80.0 mm|
|20.0 mm||90.0 mm|
|25.0 mm||100.0 mm|
|30.0 mm||130.0 mm|
|35.0 mm||160.0 mm|
|40.0 mm||200.0 mm|
|TU1||99.97||0.002||less than 0.002||balance|
|Grade||Temper||Diameter/mm||Tensile Strength Rm/(N/mm2)||Elongation A/%||Hardness HBW|
|no less than|
|TU1 TP2||C1020 C1220||Hard||3-80||－||－||－|